Notes

The questions buyers ask. Answered in writing.

Each row below is a question buyers put to TGI. 14 of the 15 have a written answer; for the rest this page says which they are, and points at the page that already carries the short version.

The questions

14 of 15 written

  1. 01

    Why do minimum order quantities exist, and how are ours set?

    Read it: Why do minimum order quantities exist, and how are ours set?

    Published · Updated

    Written after the article-level MOQs, so it can explain the real figures rather than the idea of them.

    Every MOQ is already on its product page
  2. 02

    What CE self-declaration covers, and what it does not

    Not published yet

    A compliance surface. It says the same thing the certification page says, at more length.

    The CE scope, in full, with the certificate
  3. 03

    How the steel grades actually differ

    Read it: How the steel grades actually differ

    Published · Updated

    AISI 410, 420 and 440C for instruments, 202 and 304 for hollowware: what changes in the hand, and what changes in the order.

    The four tiers, side by side
  4. 04

    What the FDA Green List is, and what it is not

    Read it: What the FDA Green List is, and what it is not

    Published

    The single most misread document in this trade. It gets its own article precisely because a short version misleads.

    The listing and its clarifier
  5. 05

    How do I import surgical instruments from Pakistan to the USA?

    Read it: How do I import surgical instruments from Pakistan to the USA?

    Published · Updated

    Samples, minimums, payment, freight and documents, in the order a US importer meets them.

    Everything for US buyers, on one page
  6. 06

    Sialkot or China: what is the real difference?

    Read it: Sialkot or China: what is the real difference?

    Published · Updated

    The country on the box tells you little. Six questions to put to any supplier, and TGI's answers.

    Six things you can check before you reply
  7. 07

    How does OEM and private label work, and what should my specification include?

    Read it: How does OEM and private label work, and what should my specification include?

    Published · Updated

    OEM against private label, the specification checklist, the minimum and the eight steps.

    OEM and private label
  8. 08

    How do I check a surgical instrument supplier before I order?

    Read it: How do I check a surgical instrument supplier before I order?

    Published · Updated

    Seven checks an importer can run without the supplier's help, with a checklist to copy.

    The certificates and how to verify them
  9. 09

    English pattern or American pattern extraction forceps?

    Read it: English pattern or American pattern extraction forceps?

    Published

    Figure numbers against catalog numbers, and how to order each system.

    Dental extraction forceps
  10. 10

    What is passivation, and why does it matter?

    Read it: What is passivation, and why does it matter?

    Published · Updated

    The acid treatment that keeps a finished instrument from rusting, and the test that shows it was done.

    How each line is tested
  11. 11

    Which steel tier should a distributor stock?

    Read it: Which steel tier should a distributor stock?

    Published · Updated

    Economy, Clinical, Premium or Executive, matched to the customer who uses the instrument.

    The four tiers, side by side
  12. 12

    How does sample approval work before a bulk order?

    Read it: How does sample approval work before a bulk order?

    Published · Updated

    What to check on a sample, and how an approved sample locks the order.

    How an order runs
  13. 13

    What does TGI check during inspection?

    Read it: What does TGI check during inspection?

    Published · Updated

    From the mill certificate on incoming steel to 100% inspection, and what TGI does not claim.

    How each line is tested
  14. 14

    Macintosh or Miller: what is the difference between the blades?

    Read it: Macintosh or Miller: what is the difference between the blades?

    Published · Updated

    Curved against straight, the five blade sizes in each set, fiber optic or LED, and how each set is ordered.

    The Macintosh laryngoscope set
  15. 15

    Which HS code applies to surgical and dental instruments?

    Read it: Which HS code applies to surgical and dental instruments?

    Published · Updated

    The six-digit code TGI lists for each category, why dental instruments have their own, and who confirms the final line.

    How an order runs

In the meantime

Ask the question directly.

+92 305 643 3255 reaches the factory on WhatsApp, and the answer comes back in writing. Free samples for all buyers: you pay only the sample shipping cost. Samples dispatched within 48 hours.