Tahir Group of Industries · Certification · https://tgind.com/certification/

Documents, with their numbers

Every certificate we hold. Printed in full.

Number, issuer and scope for every one, with the expiry where the document states one, and where the issuer runs a register, its address and the code to paste. Where there is no register, the document itself is reproduced untouched and we say so.

Certificates

ISO 9001:2015

Certificate Third-party issued

ISO 9001 certified, certificate by LL-C (Certification), valid to 04 Dec 2027. Verify it live at the certification body's online registry using the validity code printed on the certificate.

Both ISO certificates share certificate number 920229 and are distinguished by their validity codes.

Certificate number: 920229
Issued by: LL-C (Certification) Czech Republic a.s.
Valid until: 2027-12-04
First issued: 2023-03-29
Validity code: A1130737-011
Scope: Manufacturer and Exporter of Surgical, Dental, Electrosurgical, Orthopedic, Laparoscopic, Diagnostic and Beauty Instruments,Halloware The spelling "Halloware" and the comma spacing are the issuer's own, transcribed as printed rather than tidied. LL-C prints it this way on the certificate above.

How to check it

Enter validity code A1130737-011 at ll-c.org/verification and download the certificate it offers. The download is what proves the code: a valid code returns LL-C's own certificate PDF, and a wrong code returns a file named error.pdf. The on-screen line reads "The certificate is valid" whatever you type, so it is the document, not the message, that answers. (Run again 2026-08-22, with a deliberately wrong code as the control.)

The web address printed at the foot of this certificate is not the one linked here: it does not load over HTTPS today, and a browser shows a security warning instead of the registry. Use the address on this page: the same validity code returns this certificate there. Checked 2026-08-27.

Check this on ll-c.org

ISO 9001:2015, LL-C's verification page after a code is submitted, showing its "The certificate is valid" banner and the download button — Registry screenshot LL-C's verification page after a code is submitted. It prints this same banner for any code: the certificate it offers for download is what answers.

ISO 9001:2015, the certificate as issued by LL-C (Certification) Czech Republic a.s. — The certificate as issued Reproduced exactly as issued, and never altered. The web address printed on it is this company's own: the same address this site is published at, so the certificate and the site agree without anything having to be explained.

Back to the schedule

ISO 13485:2016 (EN)

Certificate Third-party issued

ISO 13485 certified, certificate by LL-C (Certification), valid to 04 Dec 2027. Verify it live at the certification body's online registry using the validity code printed on the certificate.

Both ISO certificates share certificate number 920229 and are distinguished by their validity codes.

Certificate number: 920229
Issued by: LL-C (Certification) Czech Republic a.s.
Valid until: 2027-12-04
First issued: 2023-03-29
Validity code: D60F2786-742
Scope: Manufacturer and Exporter of Surgical, Dental, Electrosurgical, Orthopedic, Laparoscopic and Diagnostic Instruments ,Halloware The spelling "Halloware" and the comma spacing are the issuer's own, transcribed as printed rather than tidied. LL-C prints it this way on the certificate above.

How to check it

Enter validity code D60F2786-742 at ll-c.org/verification and download the certificate it offers. The download is what proves the code: a valid code returns LL-C's own certificate PDF, and a wrong code returns a file named error.pdf. The on-screen line reads "The certificate is valid" whatever you type, so it is the document, not the message, that answers. (Run again 2026-08-22, with a deliberately wrong code as the control.)

Check this on ll-c.org

ISO 13485:2016 (EN), LL-C's verification page after a code is submitted, showing its "The certificate is valid" banner and the download button — Registry screenshot LL-C's verification page after a code is submitted. It prints this same banner for any code: the certificate it offers for download is what answers.

ISO 13485:2016 (EN), the certificate as issued by LL-C (Certification) Czech Republic a.s. — The certificate as issued Reproduced exactly as issued, and never altered. The web address printed on it is this company's own: the same address this site is published at, so the certificate and the site agree without anything having to be explained.

Back to the schedule

CE: Class I devices (Regulation (EU) 2017/745)

Certificate Manufacturer self-declaration

CE marking under manufacturer self-declaration for Class I, non-sterile, non-powered instruments under Regulation (EU) 2017/745 (MDR). This is not a Notified Body certificate, and the issuer, CNC Services, is not a Notified Body.

Certificate number: EC/5231/23
Issued by: CNC Services (Conformity 'n Compliance Services), Nordhorn, Germany
Valid until: 2028-03-23
First issued: Not stated on this certificate
Validity code: Not issued for this certificate
Scope: Class I, non-sterile, non-powered, non-measuring, per the manufacturer's own declaration under Regulation (EU) 2017/745
Product, as the certificate prints it: Surgical, Dental, Electrosurgical, Orthopedic, Laparoscopic, Diagnostic, Veterinary and Beauty Instruments, Mackintosh Rubber Sheet & Medical Silicone & Rubber Products.

How to check it

Enter certificate number EC/5231/23 at cncservices.net/verification: the issuer's registry returns the certificate, the company name, the class, both dates and the regulation it is issued under; a wrong number returns nothing, so the lookup discriminates. RE-CHECKED LIVE 2026-08-23 WITH A NEGATIVE CONTROL, because the LL-C lookup had already taught us that an on-screen "valid" can appear for any code: EC/5231/24, EC/9999/99 and ABC123 each returned "Certificate not found" and EC/5231/23 returned the full record. Every field this site publishes came back identical - company TAHIR GROUP OF INDUSTRIES, MDR, Class I, issued 2026-03-24, expires 2028-03-23. The CE mark carries no four-digit Notified Body number, because a Class I self-declaration does not involve one.

Check this on cncservices.net

cncservices.net registry entry for certificate EC/5231/23: Tahir Group of Industries, MDR, Class I, issued 2026-03-24, expires 2028-03-23 — Registry screenshot cncservices.net's own record for certificate EC/5231/23, as it answers the lookup described above: the company, the regulation, the class and both dates it returns are the ones printed on this card.

CE: Class I devices (Regulation (EU) 2017/745), the certificate as issued by CNC Services (Conformity 'n Compliance Services), Nordhorn, Germany — The certificate as issued

Back to the schedule

Free Sale Certificate: District Health Officer, Sialkot

Certificate Third-party issued

Free Sale Certificate issued on 04 August 2026 by the Office of the District Health Officer, Sialkot, under D.O. No. 209. It certifies that the “Surgical, Dental and Orthopedic, Medical Rubber. & Silicon Products” manufactured by Tahir Group of Industries are acceptable and that the firm sells these instruments in Pakistan as well as abroad. The words in quotation marks are the document's own product list.

This is a district-level certificate, issued by the district health office in Sialkot. It is not a national registration, it is not attested or legalised, and it states no expiry date: none is claimed for it. It is not a market authorisation in any importing country; where a market requires a nationally attested or legalised free sale certificate, that is a separate document TGI does not hold today.

Certificate number: D.O. No. 209
Issued by: Office of the District Health Officer, Sialkot, Pakistan
Valid until: No expiry date is stated on it
First issued: 2026-08-04
Validity code: Not issued for this certificate
Scope: Surgical, Dental and Orthopedic, Medical Rubber. & Silicon Products

How to check it

There is no register to check this one against: Pakistan's district health offices do not publish their certificates in a searchable registry. So the document itself is the evidence. It is reproduced on this card untouched, and its D.O. number, its date and the issuing office's telephone line printed on the letterhead (+92-052-4364387) are published here as text, so anything on it can be taken straight back to the Office of the District Health Officer, Sialkot.

Free Sale Certificate: District Health Officer, Sialkot, the certificate as issued by Office of the District Health Officer, Sialkot, Pakistan — The certificate as issued Reproduced exactly as issued, and never altered. The office's round stamp falls across the end of the certified sentence and over the signature block: that is how the document was stamped, and nothing beneath it has been removed or cleaned up. The full stop after “Rubber” in the product list is the document's own and is transcribed as printed rather than tidied. The address printed on it is the Dubai Islamic Bank Street, Shahab Pura Road address the company operates from today: the same address printed everywhere on this site.

Back to the schedule

United States

U.S. FDA Import Alert 76-01: Green List

Listing

U.S. FDA Import Alert 76-01: Green List. Tahir Group of Industries is listed on the FDA Green List (firms excluded from Detention Without Physical Examination of medical instruments from Pakistan), listed since 20 January 2016 across 13 device categories.

The Green List is a border-detention exemption, not FDA market authorization.

For buyers requiring FDA establishment registration for a long-term partnership, TGI completes the registration under a signed agreement with the buying partner.

The FDA listing carries TGI's earlier factory address (Roras Road); the company operates today from the Shahab Pura Road address shown on our certificates. Stated openly so buyers cross-checking see the full picture.

Listed since: 2016-01-20
Device categories: 73: Anesthesiology 74: Cardiovascular 76: Dental 77: Ear, Nose And Throat 78: Gastroenterological & Urological 79: General & Plastic Surgery 80: General Hospital/Personal Use 84: Neurological 85: Obstetrical & Gynecological 86: Ophthalmic 87: Orthopedic 89: Physical Medicine 90: Radiology

How to check it

Open the FDA's own Import Alert 76-01 page and use your browser's find-in-page for "Tahir Group of Industries": the name appears exactly once on it. The row reads Date Published : 01/20/2016 and carries the earlier New Miana Pura East Roras Road address, followed by the 13 device categories from 73 Anesthesiology to 90 Radiology. The page is about 5 MB and slow on a phone.

Read the FDA import alert

FDA Import Alert 76-01 Green List entry: the published row naming Tahir Group of Industries — The Green List row, as the FDA publishes it

Back to the schedule

Memberships

Sialkot Chamber of Commerce & Industry (SCCI)

Membership

SCCI member since 03 December 2004: Book B20174, Serial B2017353, valid to 31 March 2027.

Number: Book B20174 · Serial B2017353
Member ID: A-15504
Member since: 2004-12-03
Valid until: 2027-03-31
Issued by: The Sialkot Chamber of Commerce & Industry

How to check it

Search the Sialkot Chamber of Commerce & Industry's own members directory at https://scci.com.pk/members-directory/ for Tahir Group of Industries, or for Member ID A-15504. Its one search field is labeled "Enter Company Name or ID". The directory returns the member row - Member ID, company name and the telephone line - and the number it returns is the same landline this site publishes. Run on 2026-08-26 with a deliberately wrong company name as the control: that returns "No results found.", so the directory discriminates rather than answering yes to anything typed into it.

Check this on scci.com.pk

Sialkot Chamber of Commerce & Industry (SCCI), the certificate as issued by The Sialkot Chamber of Commerce & Industry — The certificate as issued

Back to the schedule

Surgical Instruments Manufacturers Association of Pakistan (SIMAP)

Membership

SIMAP member: Book B19774, Serial B1977395, valid to 31 March 2027.

Number: Book B19774 · Serial B1977395
Member ID: T142
Valid until: 2027-03-31
Issued by: The Surgical Instruments Manufacturers Association of Pakistan

How to check it

Search the Surgical Instruments Manufacturers Association of Pakistan's own members directory at https://simap.org.pk/members-directory/ for Tahir Group of Industries, or for Member ID T142. Its one search field is labeled "Search by Company name, Category and Member ID". The row it returns opens a member record giving the Member ID, the member class, the category, the street address, the landline and the website, and every one of those is the same as the fact printed on this site. Run on 2026-08-26 with a deliberately wrong company name as the control: that returns "No members found with the provided Member ID.", so the directory discriminates rather than answering yes to anything typed into it.

Check this on simap.org.pk

Surgical Instruments Manufacturers Association of Pakistan (SIMAP), the certificate as issued by The Surgical Instruments Manufacturers Association of Pakistan — The certificate as issued

Back to the schedule

Answers

How to check each one yourself

The same instructions printed beside each document above, as the questions a buyer actually asks. Nothing here is new: it is the same sentence, findable a second way.

How do I verify Tahir Group of Industries' ISO 9001:2015?: Enter validity code A1130737-011 at ll-c.org/verification and download the certificate it offers. The download is what proves the code: a valid code returns LL-C's own certificate PDF, and a wrong code returns a file named error.pdf. The on-screen line reads "The certificate is valid" whatever you type, so it is the document, not the message, that answers. (Run again 2026-08-22, with a deliberately wrong code as the control.)
How do I verify Tahir Group of Industries' ISO 13485:2016 (EN)?: Enter validity code D60F2786-742 at ll-c.org/verification and download the certificate it offers. The download is what proves the code: a valid code returns LL-C's own certificate PDF, and a wrong code returns a file named error.pdf. The on-screen line reads "The certificate is valid" whatever you type, so it is the document, not the message, that answers. (Run again 2026-08-22, with a deliberately wrong code as the control.)
How do I verify Tahir Group of Industries' CE: Class I devices (Regulation (EU) 2017/745)?: Enter certificate number EC/5231/23 at cncservices.net/verification: the issuer's registry returns the certificate, the company name, the class, both dates and the regulation it is issued under; a wrong number returns nothing, so the lookup discriminates. RE-CHECKED LIVE 2026-08-23 WITH A NEGATIVE CONTROL, because the LL-C lookup had already taught us that an on-screen "valid" can appear for any code: EC/5231/24, EC/9999/99 and ABC123 each returned "Certificate not found" and EC/5231/23 returned the full record. Every field this site publishes came back identical - company TAHIR GROUP OF INDUSTRIES, MDR, Class I, issued 2026-03-24, expires 2028-03-23. The CE mark carries no four-digit Notified Body number, because a Class I self-declaration does not involve one.
How do I verify Tahir Group of Industries' U.S. FDA Import Alert 76-01: Green List?: Open the FDA's own Import Alert 76-01 page and use your browser's find-in-page for "Tahir Group of Industries": the name appears exactly once on it. The row reads Date Published : 01/20/2016 and carries the earlier New Miana Pura East Roras Road address, followed by the 13 device categories from 73 Anesthesiology to 90 Radiology. The page is about 5 MB and slow on a phone.
How do I verify Tahir Group of Industries' Sialkot Chamber of Commerce & Industry (SCCI)?: Search the Sialkot Chamber of Commerce & Industry's own members directory at https://scci.com.pk/members-directory/ for Tahir Group of Industries, or for Member ID A-15504. Its one search field is labeled "Enter Company Name or ID". The directory returns the member row - Member ID, company name and the telephone line - and the number it returns is the same landline this site publishes. Run on 2026-08-26 with a deliberately wrong company name as the control: that returns "No results found.", so the directory discriminates rather than answering yes to anything typed into it.
How do I verify Tahir Group of Industries' Surgical Instruments Manufacturers Association of Pakistan (SIMAP)?: Search the Surgical Instruments Manufacturers Association of Pakistan's own members directory at https://simap.org.pk/members-directory/ for Tahir Group of Industries, or for Member ID T142. Its one search field is labeled "Search by Company name, Category and Member ID". The row it returns opens a member record giving the Member ID, the member class, the category, the street address, the landline and the website, and every one of those is the same as the fact printed on this site. Run on 2026-08-26 with a deliberately wrong company name as the control: that returns "No members found with the provided Member ID.", so the directory discriminates rather than answering yes to anything typed into it.
How do I verify Tahir Group of Industries' Free Sale Certificate: District Health Officer, Sialkot?: There is no register to check this one against: Pakistan's district health offices do not publish their certificates in a searchable registry. So the document itself is the evidence. It is reproduced on this card untouched, and its D.O. number, its date and the issuing office's telephone line printed on the letterhead (+92-052-4364387) are published here as text, so anything on it can be taken straight back to the Office of the District Health Officer, Sialkot.

Do it yourself

Found something that does not match? Tell us.

A document that cannot be checked is worth nothing. If a number on this page does not resolve at the registry, we want to know before you do business with us.

Tell us what does not match WhatsApp +92 305 643 3255