63 instruments Wire and pin instruments

One Hand Rod Bender

In an orthopedic catalog a bender is a hand tool that shapes an implant or a wire to a required curve.

MOQ 300 instruments

French Style Rod Bender

In an orthopedic catalog a bender is a hand tool that shapes an implant or a wire to a required curve.

MOQ 300 instruments

Jet Wire Twisting Device

MOQ 300 instruments

Orthopedic Cutter TC

A wire cutter is a hand instrument built to shear wire to length between two hardened jaw edges.

MOQ 300 instruments

Orthopedic Wire Strainer

A wire strainer is a screw tensioning hand tool used to draw a length of orthopedic fixation wire, most often a fine wire in a circular (Ilizarov type) external fixation frame, taut and hold it under tension before it is clamped to the frame.

MOQ 300 instruments

Orthopedic Extension Bow

This exact catalog name could not be independently confirmed against a live trade source in this research pass: search engines either returned unrelated results (misreading the phrase as "browser extension") or blocked the request.

MOQ 300 instruments

(Kirschner) Extension Bow

This exact catalog name could not be independently confirmed against a live trade source in this research pass: search engines either returned unrelated results (misreading the phrase as "browser extension") or blocked the request.

MOQ 300 instruments

Bohler Extension Bow for femur & knee

This exact catalog name could not be independently confirmed against a live trade source in this research pass: search engines either returned unrelated results (misreading the phrase as "browser extension") or blocked the request.

MOQ 300 instruments

Krischner Extension Bow

This exact catalog name could not be independently confirmed against a live trade source in this research pass: search engines either returned unrelated results (misreading the phrase as "browser extension") or blocked the request.

MOQ 300 instruments

Demel Wire Guide

A slender hand instrument with a smooth handle, a thin neck and a hooked (shepherd's-crook) tip.

MOQ 300 instruments

Wire Tightener w / T Handle

A T-handle is a hand tool with a short bar set crosswise on the end of a shaft, forming a 'T', which gives the hand more turning or pushing leverage than a straight handle would.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Loute Wire Tightener

A forceps-pattern instrument built to grip the two free ends, or a formed loop, of a length of cerclage or fixation wire and pull it taut, drawing the wire snug against the bone and holding it under tension.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Loute Wire Tightener

A forceps-pattern instrument built to grip the two free ends, or a formed loop, of a length of cerclage or fixation wire and pull it taut, drawing the wire snug against the bone and holding it under tension.

MOQ 300 instruments

Wire Twister

A forceps-pattern instrument that grips both free ends, or the formed loop, of a length of cerclage or fixation wire and, as the whole instrument is rotated by its handle, twists them together into a tight, self-locking knot that holds the wire under tension around the bone.

MOQ 300 instruments

Wire Pulling Forceps

Pulling forceps are two-handled gripping forceps built to seize a wire, pin, needle or similar rigid object and pull it, rather than to hold soft tissue.

MOQ 300 instruments

Rod Holder

A rod holder (rod holding forceps) is a forceps-pattern instrument whose jaws are shaped to the curve of a spinal fixation rod, closing around the rod to hold its position without turning.

MOQ 300 instruments

Rod Gripper

A rod gripper is a locking, plier-pattern instrument built to grasp a spinal fixation rod firmly at any point along its length, rather than in one fixed groove only.

MOQ 300 instruments

Rod Holder STR

A rod holder (rod holding forceps) is a forceps-pattern instrument whose jaws are shaped to the curve of a spinal fixation rod, closing around the rod to hold its position without turning.

MOQ 300 instruments

Plate Bending Plier

A plier-form hand instrument that shapes a bone plate or a wire by gripping it between two shaped jaws.

MOQ 300 instruments

Mini Plate Bending Plier

A plier-form hand instrument that shapes a bone plate or a wire by gripping it between two shaped jaws.

MOQ 300 instruments

TGI's own catalog photograph of this article.

K-Wire / Plate Bender

In an orthopedic catalog a bender is a hand tool that shapes an implant or a wire to a required curve.

MOQ 300 instruments

TGI's own catalog photograph of this article.

K-Wire / Plate Bender

In an orthopedic catalog a bender is a hand tool that shapes an implant or a wire to a required curve.

MOQ 300 instruments

Gratloch Wire Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

Double Action Wire Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

Lineman Plier

A hinged hand plier used at the orthodontic bench or chairside to grip, turn and cut heavier round or rectangular archwire, built on a box-joint pivot like other orthodontic pliers rather than a household slip-joint.

MOQ 300 instruments

Slip Joint Plier

Slip joint pliers are a hand instrument whose two jaws close on a single pivot pin riding in a slotted hole in one handle, rather than on a fixed rivet.

MOQ 300 instruments

Heavy Duty Cutter

A wire cutter is a hand instrument built to shear wire to length between two hardened jaw edges.

MOQ 300 instruments

LONG JAW Plier

A general gripping-and-cutting hand instrument, built on the same crossed-arm, single-pivot frame as an engineer's pliers but finished and sized for handling wire, pins and small hardware in surgical and orthopedic work.

MOQ 300 instruments

Narrow Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Flat Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

Pin Puller

Pin puller pliers are a heavy plier-type instrument for gripping and withdrawing a metal fixation pin or wire from bone.

MOQ 300 instruments

Screw/Pin Removing Pliers

Screw removing pliers are a locking hand instrument built to grip and turn out a bone screw or pin whose head is stripped, rounded or otherwise damaged, so an ordinary screwdriver can no longer engage it.

MOQ 300 instruments

K Wire Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Flat Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Needle Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

Wire Bending Pliers TC

A plier-form hand instrument that shapes a bone plate or a wire by gripping it between two shaped jaws.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Wire Bending Plier

A plier-form hand instrument that shapes a bone plate or a wire by gripping it between two shaped jaws.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Wire Bending Plier

A plier-form hand instrument that shapes a bone plate or a wire by gripping it between two shaped jaws.

MOQ 300 instruments

Cerclage Plier

A cerclage plier is a plier-form instrument from the orthopedic wire range, cataloged interchangeably as a wire twister or wire tightener.

MOQ 300 instruments

Martin "Diamant"

Wire cutting pliers are a two-jaw hand instrument that closes on a pivot joint to shear through wire, rather than gripping or bending it.

MOQ 300 instruments

Wire Cutting Pliers

Wire cutting pliers are a two-jaw hand instrument that closes on a pivot joint to shear through wire, rather than gripping or bending it.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Needle Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Needle Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Flat Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Needle Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

Round Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Flat Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Flat Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Flat Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Flat Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

Hackstock Flat Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Flat Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

Round Flat Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

Combi Flat Nose Plier

A general gripping-and-cutting hand instrument, built on the same crossed-arm, single-pivot frame as an engineer's pliers but finished and sized for handling wire, pins and small hardware in surgical and orthopedic work.

MOQ 300 instruments

Needle Nose Locking Plier

A plier that clamps onto wire, a pin or a small part and stays clamped on its own, without the user's hand holding the pressure, used in orthopedic and general instrument sets to hold something steady while both hands are needed elsewhere.

MOQ 300 instruments

Regular Jaw Plier

A general gripping-and-cutting hand instrument, built on the same crossed-arm, single-pivot frame as an engineer's pliers but finished and sized for handling wire, pins and small hardware in surgical and orthopedic work.

MOQ 300 instruments

Vise Grip Plier

A self-locking plier: an adjusting screw sets the jaw gap, and closing the handles snaps a toggle mechanism over-center so the jaws stay clamped shut on their own, without continued hand pressure.

MOQ 300 instruments

Long Nose Plier

Long nose locking pliers are a self locking, vise grip style plier with long, tapered jaws, used in orthopedic and general instrument sets to grip, hold, turn and bend fixation wire and Kirschner wire.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Flat Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Flat Nose Plier

A general trade term for a plier-pattern hand instrument with smooth, flat or serrated jaw faces, and no cutting edge, built to grip, bend and hold orthopedic fixation wire and Kirschner wires.

MOQ 300 instruments

Needle Vise Grip Plier

A self-locking plier: an adjusting screw sets the jaw gap, and closing the handles snaps a toggle mechanism over-center so the jaws stay clamped shut on their own, without continued hand pressure.

MOQ 300 instruments

Vise Grip Locking Plier

A self-locking plier: an adjusting screw sets the jaw gap, and closing the handles snaps a toggle mechanism over-center so the jaws stay clamped shut on their own, without continued hand pressure.

MOQ 300 instruments

Table Top Rod Cutter Wire Bender

A table top rod cutter and bender is a bench mounted lever tool that cuts and bends round fixation rod, most often spinal fixation rod, to the length and curve a case needs.

MOQ 300 instruments