59 instruments Retractors and bone levers

TGI's own catalog photograph of this article.

Bone Hook T Handle

A bone hook is a one-piece hand instrument with no joint: a straight shaft ending in a hook that curves back on itself, and a flat fenestrated ring at the other end as a handle.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Bone Hook T Handle

A bone hook is a one-piece hand instrument with no joint: a straight shaft ending in a hook that curves back on itself, and a flat fenestrated ring at the other end as a handle.

MOQ 300 instruments

Lombardi Femoral Spreader

A spreader is a two-bladed hand instrument used to hold two surfaces, edges or bone fragments apart and keep them apart without being held by hand throughout.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Calcaneal Spreader

A spreader is a two-bladed hand instrument used to hold two surfaces, edges or bone fragments apart and keep them apart without being held by hand throughout.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Calcaneal Spreader

A spreader is a two-bladed hand instrument used to hold two surfaces, edges or bone fragments apart and keep them apart without being held by hand throughout.

MOQ 300 instruments

Saxena Lamina Spreader

A spreader is a two-bladed hand instrument used to hold two surfaces, edges or bone fragments apart and keep them apart without being held by hand throughout.

MOQ 300 instruments

Inge Spreader

A spreader is a two-bladed hand instrument used to hold two surfaces, edges or bone fragments apart and keep them apart without being held by hand throughout.

MOQ 300 instruments

Lamina Spreader

A spreader is a two-bladed hand instrument used to hold two surfaces, edges or bone fragments apart and keep them apart without being held by hand throughout.

MOQ 300 instruments

INGE Spreader / Retractor

A spreader is a two-bladed hand instrument used to hold two surfaces, edges or bone fragments apart and keep them apart without being held by hand throughout.

MOQ 300 instruments

Rib Retractor

A rib retractor is a self-retaining, ratcheted retractor built to hold two rib edges apart on its own, without being held open by hand.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Hohmann Retractor

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Hohmann Retractor

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

St Mark Pelvic Retractor

A pelvic retractor is a retractor built for depth rather than width: its blades or prongs are long enough to reach and hold tissue at the base of the pelvis, where a shorter general-purpose retractor cannot reach.

MOQ 300 instruments

Murphy Bone Skid

A bone skid is a one-piece instrument with a broad, shallow, smooth blade (spoon, cup or shoehorn shaped), on a flat handle.

MOQ 300 instruments

Ribbon Retractor

A ribbon retractor is a flat blade of malleable stainless steel with a plain handle, bent by hand into whatever curve the field requires and held in that shape without any spring, ratchet or joint.

MOQ 300 instruments

Pelvic Retractor Single Prong

A pelvic retractor is a retractor built for depth rather than width: its blades or prongs are long enough to reach and hold tissue at the base of the pelvis, where a shorter general-purpose retractor cannot reach.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Humeral Head Retractor

A humeral head retractor is an orthopedic retractor used in shoulder-joint surgery, shaped to hook against the humeral head or glenoid neck and hold it clear of the working field.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Aufranc Cobra Retractor

A cobra retractor is a hand-held orthopedic retractor named for the shape of its working end: a blade that widens and curls back at the tip in the shape of a cobra's raised hood.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Aufranc Cobra Retractor

A cobra retractor is a hand-held orthopedic retractor named for the shape of its working end: a blade that widens and curls back at the tip in the shape of a cobra's raised hood.

MOQ 300 instruments

Mini Hohmann Bone Lever Set

A bone lever set is several bone levers of one pattern, supplied together in a graduated run of blade widths, normally in a perforated tray, rack or case that carries them through cleaning and steam sterilizing.

MOQ 300 instruments

Hayes Retractor

Handheld retractor is the same trade term as hand-held retractor, spelled without the hyphen as it appears in some catalogs: a retractor with no self-retaining ratchet, screw or frame, held in place for as long as it is needed rather than locking itself open.

MOQ 300 instruments

Blade Retractor

A blade retractor is a hand-held retractor whose working end is a flat blade rather than a hook, ring or rake.

MOQ 300 instruments

Hibbs Retractor

Handheld retractor is the same trade term as hand-held retractor, spelled without the hyphen as it appears in some catalogs: a retractor with no self-retaining ratchet, screw or frame, held in place for as long as it is needed rather than locking itself open.

MOQ 300 instruments

Knee Retractor

A knee retractor is a handheld lever-type retractor sized and curved for exposure of the knee joint, larger than the general-purpose Hohmann-type retractors used elsewhere in orthopedic surgery.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Smillie Retractor

A knee retractor is a handheld lever-type retractor sized and curved for exposure of the knee joint, larger than the general-purpose Hohmann-type retractors used elsewhere in orthopedic surgery.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Smillie Retractor

A knee retractor is a handheld lever-type retractor sized and curved for exposure of the knee joint, larger than the general-purpose Hohmann-type retractors used elsewhere in orthopedic surgery.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Smillie Retractor

A knee retractor is a handheld lever-type retractor sized and curved for exposure of the knee joint, larger than the general-purpose Hohmann-type retractors used elsewhere in orthopedic surgery.

MOQ 300 instruments

Bristow Retractor

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Capsule Retractor

A capsule retractor is a hand-held, single-ended steel retractor listed in the orthopedic hip and shoulder sections of a catalog rather than on the general-surgery retractor pages.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Capsule Retractor

A capsule retractor is a hand-held, single-ended steel retractor listed in the orthopedic hip and shoulder sections of a catalog rather than on the general-surgery retractor pages.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Capsule Retractor

A capsule retractor is a hand-held, single-ended steel retractor listed in the orthopedic hip and shoulder sections of a catalog rather than on the general-surgery retractor pages.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Humeral Head Retractor

A humeral head retractor is an orthopedic retractor used in shoulder-joint surgery, shaped to hook against the humeral head or glenoid neck and hold it clear of the working field.

MOQ 300 instruments

Deltoid Retractor

A hand-held single-blade retractor cataloged in the shoulder section of an orthopedic chapter.

MOQ 300 instruments

Z Knee Retractor

A knee retractor is a handheld lever-type retractor sized and curved for exposure of the knee joint, larger than the general-purpose Hohmann-type retractors used elsewhere in orthopedic surgery.

MOQ 300 instruments

Bristow Humeral Retractor

A humeral retractor, cataloged as the Bristow-Bankart Humeral Retractor, is an orthopedic retractor used in shoulder-stabilization surgery to hold the humeral head clear of the glenoid rim.

MOQ 300 instruments

Fukuda Retractor

A shoulder retractor is a hand-held, single-blade retractor shaped to work in the deep, tight field of an open shoulder procedure.

MOQ 300 instruments

Taylor Spinal Retractor

A spinal retractor is a long, hand-held retractor used to hold soft tissue away from the vertebral column at depth.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Blount Knee Retractor

A knee retractor is a handheld lever-type retractor sized and curved for exposure of the knee joint, larger than the general-purpose Hohmann-type retractors used elsewhere in orthopedic surgery.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Hohmann Bone Lever

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Blount Knee Retractor

A knee retractor is a handheld lever-type retractor sized and curved for exposure of the knee joint, larger than the general-purpose Hohmann-type retractors used elsewhere in orthopedic surgery.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Hohmann Bone Lever

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Blount Knee Retractor

A knee retractor is a handheld lever-type retractor sized and curved for exposure of the knee joint, larger than the general-purpose Hohmann-type retractors used elsewhere in orthopedic surgery.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Hohmann Bone Lever

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Hohmann Bone Lever

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

Bennett Bone Lever

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

Lange Hohmann Bone Lever

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Hohmann Bone Lever

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Hohmann Bone Lever

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Hohmann Bone Lever

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Hohmann Bone Lever

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Hohman, Mini Bone Lever

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

Mini Bone Lever

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Hohman, Mini Bone Lever

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Hohman, Mini Bone Lever

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

Bone Lever

A bone lever is a one-piece instrument with a flat blade bent back at an angle to the shaft, so the blade sits over a bone edge and the shaft acts as the lever arm.

MOQ 300 instruments

Bone Hook Fiber Handle

A bone hook is a one-piece hand instrument with no joint: a straight shaft ending in a hook that curves back on itself, and a flat fenestrated ring at the other end as a handle.

MOQ 300 instruments

TGI's own catalog photograph of this article.

Bone Hook T Handle

A bone hook is a one-piece hand instrument with no joint: a straight shaft ending in a hook that curves back on itself, and a flat fenestrated ring at the other end as a handle.

MOQ 300 instruments

Bone Hook

A bone hook is a one-piece hand instrument with no joint: a straight shaft ending in a hook that curves back on itself, and a flat fenestrated ring at the other end as a handle.

MOQ 300 instruments

Volkmann Bone Hook

A bone hook is a one-piece hand instrument with no joint: a straight shaft ending in a hook that curves back on itself, and a flat fenestrated ring at the other end as a handle.

MOQ 300 instruments