Dental instruments Dask Sinus Lift Curette Set
TGI reference TG-REF:768 Quote this to us. It is printed on TGI's own catalogue photograph of this article. TGI-C-85D1480B Web reference. It identifies this page, not a factory part number.
Also printed on the photograph DASK · (Tıtanium Blue/Gold) Printed on TGI's own catalogue photograph of this article.
Also called Dentium Advanced Sinus Kit (DASK) curette
Its tip is dome-shaped rather than a flat spoon, built for the crestal, through-the-ridge sinus-lift technique associated with the Dentium Advanced Sinus Kit, rather than the lateral-window approach the plain sinus lift curette is shaped for.
A bone curette set is a graduated group of bone curettes packaged together so several cup sizes are on hand at once, because one cup size cannot reach every cavity width in a bone. Each curette in the set has an oval or round metal cup at the working end, mounted on a straight or lightly angled shaft with a round, hexagonal or knurled handle. Cups are hollow (open-sided) or solid-backed, and the rim is ground either sharp or rounded, with the set running from a small cup up to a larger one.
Minimum order 200 instruments The minimum for dental instruments. Mixed orders are quoted against your list.
Lead time Instruments ~2-3 weeks · full sets ~4-6 weeks after advance.
Quality control
The inspection step is set by the line you order.
- Economy line
- sample: visual + dimensional
- Clinical line
- sample + boil test
- Premium line
- tighter sample + hardness test
- Executive line
- 100% inspection + laser mark
Finish A colour is a second choice, made on top of the line. Coloured finishes on request, on any instrument, in addition to the steel line. Evidenced: black · gold · rose gold · blue · rainbow (anodised titanium).
How it is built
- Working end: an oval or round metal cup, hollow or solid-backed, with a sharp or rounded rim
- Handle: round, hexagonal or knurled/fluted metal handle
- Shaft: straight, or gently angled between handle and cup on some patterns
- Ends: single-ended (one cup) or double-ended (two cup sizes/shapes on the same handle)
- Set composition: several curettes of ascending cup size packed together, typically numbered in an ascending series or specified by cup diameter
- Packaging: loose, in a roll pouch, or seated in a fixed-slot cassette/tray
Patterns Spratt · Meyer-Hoffer · Heath
The standard sizes this kind of instrument is made in
0.5 mm cup · 1 mm cup · 1.5 mm cup · 2 mm cup · 4 in (10 cm) overall length · 5 in (12.5 cm) overall length · 6.5 in (16.5 cm) overall length
These are the sizes the pattern is manufactured in across the trade. They are not a stock list. Tell us the size you need and we will quote against it.
This describes the bone curette set as an article. 8 other articles in this catalogue share it: the sentence above is what separates this one. This describes the article. The steel, the finish and the inspection step are set by the line you order.
Material and quality
| Line | Steel | Origin | Finish | Inspection |
|---|---|---|---|---|
| Economy line | AISI 410 | Pakistani or Taiwanese | satin, passivated | sample: visual + dimensional |
| Clinical line | AISI 420 | Pakistani or German | satin, passivated | sample + boil test |
| Premium line | AISI 420-440C | German or Japanese | fine polish, passivated | tighter sample + hardness test |
| Executive line | AISI 440C | German or Japanese | mirror polish, passivated | 100% inspection + laser mark |
This is the steel each line is made from as standard. A different origin can be supplied on request (a lower grade in Japanese steel, for example), agreed on your order.
Premium is the line where the choice is yours: 420 or 440C, agreed on your order. Economy is always 410 and Executive is always 440C. Those three are the instrument steels. Hollowware and sterilisation containers are made in AISI 202 on a Clinical order and AISI 304 on a Premium or Executive one, and they are not offered in the Economy line at all, which is the section above.
True of every order
Instruments are marked to the buyer's requirement (TGI, unmarked, or the buyer's own brand), agreed on the order.
Customised packaging is part of what TGI supplies. Your own printed boxes, your labels, your brand on the pack, or plain export packing, whichever your market needs. The packing for your order is agreed with you and confirmed on the order.
Manufactured under the quality management system covered by TGI's ISO 9001:2015 and ISO 13485:2016 certificates. Certificate numbers and the issuer's registry are on the certification page. Open the certificates
Every batch of steel is ordered to a specified grade and arrives with the mill's own certificate, which identifies the mill and states the grade. TGI checks the material at the factory against its own requirement before it goes into production. That check is TGI's own inspection, not an independent laboratory test.
TGI manufactures in its own factory in Sialkot and also supplies articles made by contracted partner workshops, to TGI's specification. Which applies to a given article is confirmed on your order.
One-year guarantee on Premium and Executive tier instruments, hollowware and sterilisation containers: any technical manufacturing defect, including material faults and rust, is replaced free of charge. Damage from handling or accidents is not covered. The year runs from the day the goods leave Sialkot.
If something is wrong with a delivery (a manufacturing defect, or a short or wrong article), tell us on WhatsApp within 7 days of delivery, with a video and photographs of what arrived. Replacement instruments are sent free of charge and dispatched within 24 hours of us seeing them; you pay the shipping, and they reach you as a normal order does.
Damage that happened after the goods left Sialkot is a claim against your carrier. The video of your parcel at the shipping office is sent to you before shipment and is the evidence that claim needs.